mmd monitor/quartztek 30400 esperanza, rancho santa margarita, ca, 92688 phone: (949) 709-5075, fax: (949) 709-3536, www.mmdcomp.com sales@mmdcomp.com in the event of conflict, the requiremen ts of this specification shall govern. revision: 11/18/10 e revisions only with customer approval pg 1 of 2 m m a a c c s s e e r r i i e e s s 1 1 4 4 p p i i n n d d i i p p o o s s c c i i l l l l a a t t o o r r shock mil-std-883, method 2002 cond b solderability mil-std-883, method 2003 solvent resistance mil-std-202, method 215 vibration mil-std-883, method 2007, cond a gross leak test mil-std-883, method 1014, cond c fine leak test mil-std-883, method 1014, cond a2 msl level 1 per ipc/jedec j-std 20 environmental & mechanical detail marking detail ?? industry standard package ?? rohs compliant available ?? 32.768khz ?? cmos output frequency range 32.768khz frequency stability (inclusive of temperature, load, voltage and aging) see part number guide operating temperature see part number guide storage temperature -55c to +125c supply voltage 5.0vdc 10% supply current 10ma max waveform cmos logic ?0? 10% vdd max logic ?1? 90% vdd min duty cycle see part number guide load 10k ohms // 15pf rise / fall time 10% to 90% of waveform 10nsec max tri-state operation voh = 70% of vdd min or no connection to enable output vol = 30% of vdd max or grounded to disable output (high imped- ance) line 1 = mxxxxx m = mmd xxxxx = frequency in mhz line 2 = syywwl s = internal code yyww = 4 numerical digit date code (year / week) l = denotes rohs compliant line 3 = xxxxx internal use only may vary with lots pin 1 designator
mmd monitor/quartztek 30400 esperanza, rancho santa margarita, ca, 92688 phone: (949) 709-5075, fax: (949) 709-3536, www.mmdcomp.com sales@mmdcomp.com in the event of conflict, the requiremen ts of this specification shall govern. revision: 11/18/10 e revisions only with customer approval pg 2 of 2 050 = 50 ppm 100 = 100 ppm frequency stability supply voltage 5 = +5.0 vdc rohs compliant blank = not compliant f = is rohs compliant blank = no added options g1 = gull-wing (option 1) g = gull-wing (option 2) clxxx = cut leads xxx = lead length code value added options pin 1 connection blank = no connect h = tri-state blank = 40/60% a = 45/55% symmetry blank = 0c to +70c 27 = -20c to +70c 48 = -40c to +85c operating temperature MAC 32.768khz please consult with mmd sales department for any other parameters or options 14 pin dip 5 part number guide mechanical details 1 14 8 7 5.08 [.200] 15.24 [.600] 7.62 [.300] pin 1 pin 7 pin 8 pin 14 n/c or tri-state case ground output supply voltage pin connections dimensions in bracket are in inches external bypass capacitor recommended 20.70 [.815] max 5.08 [.200] min .50 [.020] 13.10 [.516] max mxxxxx syywwl xxxxx
|
